Canon STE-2 Wireless TTL
(Digital Compatible)

The Canon Speedlite Transmitter STE-2 is a dedicated E-TTL (II) wireless autoflash transmitter that can control an unlimited number of 420EX, 550EX, 580EX, or MR-14EX and MT-24EX flashes, in up to three separate groups; A, B, and C. The STE-2 sets and controls all functions of its slave units. The flash output ratio between groups A and B can also be adjusted from 8:1 to 1:1 or from 1:1 to 1:8. Under low-light or low-contrast conditions it emits an AF-assist beam linked to the EOS-3's 45 focusing points.

Note: 420EX can not be used as the master slave to trigger other flashes.

• Compatible with 420EX, 550EX, 580EX, or MR-14EX and MT-24EX Macro flashes
• Compatible Cameras: Type A EOS cameras (E- TTL, autoflash); type B EOS cameras (Manual flash)
• Flash Ratio Control: For A:B ratio: 1:8 to 8:1, in half- step increments or 13 steps
• High- Speed Sync (FP flash): Enabled with high-speed sync mode
• Slave Operation Confirmation: With test transmission button. *Slave A fires followed by slave B at 1/64 output
• AF-assist Beam: Compatible with EOS-3's 45-point Area AF and 28mm and longer lens focal lengths
• SE Feature: While the power switch is set to I or HOLD, the transmission turns off automatically after about 90 sec. of non-use

Download: Canon STE-2 Specifications

Canon Off Camera Shoe Cord 2
(Digital Compatible)

The Canon Off Camera Shoe Cord 2 maintains all on-camera flash functions (including E-TTL) for one Canon Speedlite used off-camera at distances up to 2 ft. (60 cm).  It is compatible with all Canon EOS cameras except the 630 and RT(which require a combination of TTL Hot Shoe Adapter 3, OA-2 Off Camera Shoe Adapter & Connecting Cord 60).  It is also fully functional with the combination of the T90 camera and 300TL flash(from Canon's older FD manual focus system).

Canon Off Camera Shoe Adapter
(ATTL Compatible)

Accepts one flash and a connecting cord to the camera. To be used with TTL Hot Shoe Adapter 3 and EOS Connecting Cord 60 or 300 for off-camera TTL use.

Note: Provides standard TTL or manual flash control, but not E-TTL or E-TTL II.
Not compatible with EOS digital SLR cameras.

Canon Connecting Cord 60

2ft. coiled cord, with connections on both ends, connects to TTL Hot Shoe Adapter 2, TTL Distributor and Off-Camera Shoe Adapter.

This accessory provides TTL or manual flash control, but is not compatible with E-TTL and will not support automatic flash on digital SLRs.

Canon Connecting Cord 300

9.8ft straight cord, with connections on both ends, connects to TTL Hot Shoe Adapter 2, TTL Distributor and Off-Camera Shoe Adapter.

This accessory provides TTL or manual flash control, but is not compatible with E-TTL and will not support automatic flash on digital SLRs.

Canon TTL Distributor

Functions as a central "distribution" hub for EOS TTL off-camera operation, and will accept up to four Connecting Cords (one to camera, three to flashes). To be used with TTL Hot Shoe Adapter 3 or Off-Camera Shoe Adapter OA-2 and EOS Connecting Cord 60 or 300 for off-camera TTL use.

Note: Provides standard TTL or manual flash control, but not TTL or TTL II.
Not compatible with EOS digital SLR cameras.

(Limited Availability)
Minolta OS-1100 Off Camera Shoe

For original Maxxum flashes. Attaches original Maxxum flashes to xi or i series camera body. Has ISO shoe on top and i/xi-type foot on bottom. Also allows use of Data Receiver DR-1000 on Maxxum 8000i or 7000i bodies.

(Limited Availability)
Minolta OS-1100 Off Camera Cable

For Maxxum xi and i-series flashes. Use alone to connect 5400xi or 5200i flashes for off-camera operation. Combines with Off-Camera Shoe OS-1100 for use with other xi or i-series Maxxum flashes off-camera.Allows for flexible flash positioning and precise light balance control. Use original Cable OC to connect original Maxxum flashes to original Maxxum cameras. Combine with OCS for 2800AF and 1800AF.

Olympus FL-CB02 Hot Shoe TTL Cable

The flash bracket cable FL-CB02 has a five pin extension flash connector as well as a hot shoe (5 pin <-> hot shoe). It links the compatible Olympus digital camera to an external flash. For example an E-system camera body and the FP-1* flash power grip can be connected.

* RG-1 Remote Grip Cable is necessary for shutter release via the FP-1.

Olympus FL-CB05 Hot Shoe TTL Cable

The extension flash bracket cable FL-CB05 allows the use of the Olympus external flash units in connection with Olympus digital camera models equipped with a hot shoe. It has a maximum length of 1 metre and can be connected via clip-on hot shoe to the compatible Olympus digital camera. With this extension cable you can use the flash without directly placing it on the cameras hotshoe.

Pentax F5PL TTL Sync Cord

9.5' straight cord connecting one of the hot shoe adapters (attached to the camera) directly with the AF-500FTZ flash or to one of the above adapters attached to the bottom of another Pentax flash.

Pentax 5P TTL Sync Cord

Connects the 67II to the AF-400T flash for TTL flash operation (for side mounted flash operation, use the AF-400T bracket along with the AF-400T flash)