Gitzo G1077

The G1077M is the lowest profile head in the range. Lightweight yet robust, it weighs under .5lbs and can support equipment up to 5.5 lbs.

The G1077M features a precision machined aluminum ball for ultra-smooth operation, along with a single lock for rapid and reliable locking in any position.

Magnesium offers the advantage of being up to 20% lighter than regular photographic heads.

• Load Capacity: 5.5 lb
• Head Height: 2.4 in
• Weight: 0.3 lb

Gitzo G1177

The G1177M Center Ball Head is a perfect match for Series One tripods such as the G1118, G1120, G1126 and carbon fiber G1127 and G1128 models.

Features a precision machined aluminum ball for ultra-smooth operation, along with a single lock for rapid and reliable locking in any position. It weighs under 1lb and can support equipment up to 9 lbs.

The 'M' in G1177M stands for 'Magnesium.' Magnesium offers the advantage of being up to 20% lighter than regular photographic heads.

• Load Capacity: 8.82 lb
• Head Height: 3.54 in
• Weight: 0.68 lb

Gitzo G1178M

The G1178M features a precision machined aluminum ball allowing an ultra-smooth operation. With a single lock for rapid and reliable locking in any position. Quick release plates now feature Safe Grip, a high grip material that holds your equipment safely and prevents it from moving or slipping.

• Anti leg rotation system.
• Double quick release safety system.
• Seprate friction control.
• Ground level set.
• G-Lock.
• Leveling bubble.

Gitzo GH1780

GH1780 ball head, is designed to be an extremely balanced product, that not only guarantee a high max load, but that also maximize other key features, too often overlooked by the end users. These features include smoothness, minimized drift angle, lightweight, low gravity center, greater tilt angles, compactness, ergonomics and safety.

• 360 degree pan movement, +95/-13 degree tilt movement
• Load Capacity: 22 lbs (10kg)
• Height: 3.1" (8cm)
• Quick Release: No
• Spirit Level: Yes (vertical)
• Tension Control: N
• Separate Panning Lock: Yes
• Tripod Mount Thread Size: 3/8" - 16
• Weight: 9.9 oz (280g)

Gitzo GH1780QR

GH1780QR ball head, is designed to be an extremely balanced product, that not only guarantee a high max load, but that also maximize other key features, too often overlooked by the end users. These features include smoothness, minimized drift angle, lightweight, low gravity center, greater tilt angles, compactness, ergonomics, safety and the Quick Release system.

• 360 degree pan movement, +95/-13 degree tilt movement.
• Load Capacity: 30.8 lbs (14kg)
• Height: 3.8" (9.6cm)
• Quick Release: Yes
• Spirit Level: Yes
• Tension Control: No
• Separate Panning Lock: Yes
• Tripod Mount Thread Size: 3/8"-16
• Weight: 12.3 oz (350g)

Gitzo GH2780

GH2780 ball head, is designed to be an extremely balanced product, that not only guarantee a high max load, but that also maximize other key features, too often overlooked by the end users. These features include smoothness, minimized drift angle, lightweight, low gravity center, greater tilt angles, compactness, ergonomics and safety.

• 360 degree pan movement, +100/-18 degree tilt movement.
• Load Capacity: 30.8 lbs (14kg)
• Height: 3.8" (9.6cm)
• Quick Release: No
• Spirit Level: Yes (vertical)
• Tension Control: Yes
• Separate Panning Lock: Yes
• Tripod Mount Thread Size: 3/8" - 16
• Weight: 11 oz (430g)

Gitzo GH2780QR

GH2780QR ball head, is designed to be an extremely balanced product, that not only guarantee a high max load, but that also maximize other key features, too often overlooked by the end users. These features include smoothness, minimized drift angle, lightweight, low gravity center, greater tilt angles, compactness, ergonomics, safety and the Quick Release system.

• 360 degree pan movement, +100/-18 degree tilt movement.
• Load Capacity: 30.8 lbs (14kg).
• Height: 4.3" (11cm).
• Quick Release: Yes.
• Spirit Level: Yes.
• Tension Control: Yes.
• Separate Panning Lock: Yes.
• Tripod Mount Thread Size: 3/8"-16
• Weight: 1.1 lb (500g).

Gitzo GH2781T

GH2781T is a “simplified” center ball head, specifically conceived for travelling. This new head combines lightweight and compactness with a lot of the innovative features. First of all the ball is the revolutionary Gitzo patent pending “Bubble Ball” PTFE treated, mounted on PTFE bushings. Apart from the dramatic weight reduction achieved, this beautiful sphere guarantees an exceptionally smooth operation. Also the locking system is the Gitzo unique and patent pending Spring Assisted Double Lock (SADL) that combines two locking systems in one, maximising both locking power and operation smoothness.

Gitzo GH2781TQR

The GH2781TQR is a “simplified” center ball head, specifically conceived for travelling. This new head combines lightweight and compactness with a lot of the innovative features. First of all the ball is the revolutionary Gitzo patent pending “Bubble Ball” PTFE treated, mounted on PTFE bushings. Apart from the dramatic weight reduction achieved, this beautiful sphere guarantees an exceptionally smooth operation. Also the locking system is the Gitzo unique and patent pending Spring Assisted Double Lock (SADL) that combines two locking systems in one, maximising both locking power and operation smoothness. With quick release adapter.

• Anti leg rotation system.
• Double quick release safety system.
• Seprate friction control.
• Ground level set.
• G-Lock.
• Leveling bubble.
• Safe lock.
• Fluid cartridge.
• Balancing system.

Gitzo GH3780

GH3780 ball head, is designed to be an extremely balanced product, that not only guarantee a high max load, but that also maximize other key features, too often overlooked by the end users. These features include smoothness, minimized drift angle, lightweight, low gravity center, greater tilt angles, compactness, ergonomics and safety.

• 360 degree pan movement, +100/-18 degree tilt movement.
• Load Capacity: 46.2 lbs (21kg)
• Height: 4.45" (11.3cm)
• Quick Release: No.
• Spirit Level: Yes (vertical).
• Tension Control: Yes.
• Separate Panning Lock: Yes.
• Tripod Mount Thread Size: 3/8" - 16.
• Weight: 1.3 lb (600g).

Gitzo GH3780QR

GH3780QR ball head, is designed to be an extremely balanced product, that not only guarantee a high max load, but that also maximize other key features, too often overlooked by the end users. These features include smoothness, minimized drift angle, lightweight, low gravity center, greater tilt angles, compactness, ergonomics, safety and the Quick Release system.

• 360 degree pan movement, +100/-18 degree tilt movement.
• Load Capacity: 46.2 lbs (21kg).
• Height: 5" (12.6cm).
• Quick Release: Yes.
• Spirit Level: Yes.
• Tension Control: Yes.
• Separate Panning Lock: Yes.
• Tripod Mount Thread Size: 3/8" - 16
• Weight: 1.6 lb (710g).

Kirk BH-1

• Features a quick release with built-in spirit level
• Constructed of aluminum, brass, and stainless steel for rugged dependability and light weight
• Height: 4 9/16 inches
• Ball Diameter: 2.125 inches
• Pan Base Diameter: 2.9 inches
• Ball Tilt: 45 & 90 degrees
• Pan Base: 360 degree rotation with positive lock
• Load Capacity: 50 pounds
• Weight: 30 ounces

Kirk BH-3

• Features full-size sure-grip knobs (same size as our BH-1) for easy control, even while wearing gloves!
• Constructed of aluminum, brass, and stainless steel for rugged dependability and light weight
• Height: 4 inches
• Ball Diameter: 1.65 inches
• Pan Base Diameter: 2.4 inches
• Ball Tilt: 45 & 90 degrees
• Pan Base: 360 degree rotation with positive lock
• Load Capacity: 15 pounds
• Weight: 19 ounces

Manfrotto 322RC2

Take the versatility of a ball head, add true ergonomic control and you get the 322RC2: a photographic head that allows you to unblock, move, position and lock your camera with one hand in one position thanks to the revolutionary design of its grip handle, which incorporates the ball lock lever and can also mount the optional 322RS shutter release accessory. A friction control wheel lets you regulate the power of the blocking mechanism to match the weight of your camera/lens. The 322RC2 is made from magnesium for lightweight performance, and is designed to keep the weight of your kit as close as possible to the tripod's centre of gravity by way of its reduced height. It is this fact, matched with the precision construction of the 322RC2 that gives the head its load capacity of 5kg. The 200PL quick release plate assembly can be removed and positioned for left-handed use or on the top of the grip in a vertical position like the 'traditional' 222 design, but when used in this position, max load reverts to 2.5kg capacity. Complete with built-in bubble spirit level and quick release camera plate (standard 1/4" screw, with secondary safety pin). Suitable for use with 35mm or medium format cameras.

• Height: 10.3
• Weight: 0.7
• Load Capacity: 5.0
• Bogen Code: 322RC2

Manfrotto 486

The Compact Ball Head is strong enough to take 35mm SLR cameras with medium lenses, and light medium format cameras. It has a single indexed "ratchet" locking knob for 360° pan and +90° -90° tilt movements. Camera attachment is via a 60mm platform with 1/4" male thread. Head to tripod attachment is 3/8" female. All aluminium construction and black finish.

• Height: 9.2
• Weight: 0.38
• Load Capacity: 6.0
• Bogen Code: 486

Manfrotto 486RC2

The Compact Ball Head is strong enough to take 35mm SLR cameras with medium lenses, and light medium format cameras. It has a single indexed "ratchet" locking knob for 360° pan and +90° -90° tilt movements. Head to tripod attachment is 3/8" female. All aluminium construction and black finish. Equipped with a quick release 200PL camera plate system with a secondary safety catch. Camera plate has 1/4” male thread.

• Height: 10.0
• Weight: 0.46
• Load Capacity: 6.0
• Bogen Code: 486RC2

Manfrotto 488

With its solid aluminum construction and phenolic resin ball, this head is the ideal support for all traditional or digital small or medium format cameras. It features separate fast action "ratchet" locks on 360° pan and +90 -90° tilt movements. You can position your camera anywhere in 180° sphere with confidence and ease. Camera attachment is via a 60mm platform with 1/4" and 3/8" male thread. Head to tripod attachment is 3/8" female.  

• Height: 11.2
• Weight: 0.56
• Load Capacity: 8.0

Manfrotto 488RC2

Same as the 488 but equipped with a quick release 200PL camera plate system with a secondary safety catch. Camera plate has 1/4” male thread. Head to tripod attachment is 3/8” female.

• Height: 10.8
• Weight: 0.67
• Load Capacity: 8.0
• Bogen Code: 488RC2

Manfrotto 488RC4

With its solid aluminum construction and phenolic resin ball, this head is the ideal support for all traditional or digital small or medium format cameras. It features separate fast action "ratchet" locks on 360° pan and +90 -90° tilt movements. You can position your camera anywhere in 180° sphere with confidence and ease. Equipped with a quick release 410PL camera plate system with a secondary safety catch and two spirit levels for precise levelling on both vertical or horizontal axes. Camera plate has 1/4" male thread. Head to tripod attachment is 3/8" female.

• Height: 11.5
• Weight: 0.80
• Load Capacity: 8.0

Novoflex Ball 30 and Ball 40

The two newest ball heads 30 and 40 (BALL 30 / BALL 40) easily prove their stability and high precision. The pan rotation over 360° is locked with a knob. The ball head 30 (BALL 30) holds equipment up to 5 kg / 11 lbs, the ball head 40 (BALL 40) up to 10 kg / 22 lbs without any problems. Characteristic is the grease-free operation of the ball, which eliminates problems with dust and dirt. Noncorrosive materials make both balls genuine outdoor products. The ball heads 30 and 40 (BALL 30 / BALL 40) are the ideal addition to the NOVOFLEX universal clamps (UNIKLEM) and the NOVOFLEX mini tripod (BASIC BALL).

BALL 30:

Dimensions: h = 75 mm (3”), Ø = 41 mm (1.6”)
Weight: 255 g (0.56 lbs)
Tripod connection: 1/4, 3/8”
Camera connection: 1/4“
Max. load capacity: 5 kg (11 lbs)

BALL 40:

Dimensions: h = 95 mm (3.7“), Ø = 53 mm (2.1“)
Weight: 485 g (1.07 lbs)
Tripod connection: 1/4”, 3/8”
Camera connection: 1/4”
Max. load capacity: 10 kg (22 lbs)

Novoflex MagicBall

The MagicBall ball head series is yet another example of NOVOFLEX‘s outstanding ability to develop innovative and practical accessories. There are three models in the MagicBall series – for different camera configurations with total weight from 10 lbs/ 5kg up to 22 lbs/ 10 kg. The ball heads provide an unbelievable positioning range of 120° in virtually any plane. All three models are easy to handle and compatible with practically any tripod. Part of the secret is the large, grippy point-and-fix handle. The handle is used to position the MagicBall exactly, then a simple twist fixes it firmly in place. On the 2 larger models, designed for heavier equipment, adjustment is made even easier by an integrated friction setting. This variable tension control lets you match the camera weight to the adjusting force. The outstanding design and use of only the finest materials blocks almost any vibration transfer. The knurled wheel allows simple and safe camera mounting.

Suitable for 35 mm and middle format cameras with big telephoto lenses and professional video cameras up to 22 lbs / 10 kg.
Integrated friction control.

Technical specifications:

Height: 4.13” / 105 mm
Ball: Ø 2.36” / 60 mm
Length: 6.3” / 160 mm
Base diameter: Ø 1.97” / 50 mm
Support pad: 2.1” x 1.5” / 55 × 40 mm
Weight: 2.0 lbs / 920 g
Load capacity: 22 lbs / 10 kg

Novoflex MagicBall Mini

The smallest, most light-weighted member of the MagicBall family.

MagicBall Mini (MB Mini):

Suitable for camera equipment up to 11 lbs / 5 kg.
Ideal for use i.e. on monopods.
Without tension control.

Technical specifications:

Height: 2.95” / 75 mm
Ball: Ø 1.57” / 40 mm
Length: 4.3” / 110 mm
Base diameter: Ø 1.38” / 35 mm
Support pad: 1.77” x 1.18” / 45 × 30 mm
Weight: 0.73 lbs / 330 g
Load capacity: 11 lbs / 5 kg