Ianiro Redhead (1000w)

• Steel housing.
• Extra-pure polished aluminium reflector.
• Lampholder cup matt black finished
• Lampsocket type R7s.
• Spot-flood rear knob.
• Power cable 3,50 m. long. Section 3x1,5 mm.2 CEI 20-22.
• In-line switch 8 Amp. 250V (16 Amp. 125V)
  with fibre glass protective housing.
• Yoke mount in aluminium with 5/8" (16mm) socket
• Clamp mount in fibre glass with hinged arm.

Ianiro Blonde (2000w)

• Lightweight construction:
  code 1610 aluminum housing; code 220 steel housing.
• Epoxy anti-scratch finish on outside: standard colour blonde,
  black on request;
• Heat resistant matt black finish on the inside.
• Extra-pure polished aluminum reflector, diffuser finish on models 1610.
• Pole operated spot-flood control on model 1610,
  manual spot-flood rear knob on model 220.
• Aluminum yoke mount with 5/8" (16 mm.) socket.
• Power cable 3,20 m. long. Section 3x2,5 mm2. CEI 20-22.
• In-line switch 10Amp 250V (20Amp. 125V), with housing.

Lowel V Light (V1-10)

Powerful enough to light a small room yet small enough to fit in a large pocket, the versatile V-light can be used as a broad, key, fill (with umbrella or diffusion gel), back-light, or background light. The perfect partner for the Pro-light, it's also excellent for copy work.

• Extreme wide angle, smooth, multi-use, tungsten halogen source.
• Watts: 500 at 120v, 500 at 220 & 240v.
• Light controls: umbrella, gel-frame, gels, flags, etc.
• Tilting: 280°, adjustable, constant-tension, one-handed, tilting.
• Protective glass tube syurrounds low-pressure lamp (must always be used)
• Closes compactly for storage and travel.
• CE Approved 230v model available.

Lowel Omni Light (01-10)

The wide focusing range of the Omni-light makes it a flexible key or back-light. Add diffusion or an umbrella, and it's a soft fill source. Swap the power cord & lamp and it becomes a battery powered, hand-held light. Available with a host of accessories and built for heavy duty long life, the popular Omni is the perfect companion to the Tota.

Multi-use halogen source.

Double parabolic, peened reflector provides non-crossover beam for maximum efficiency and gel life.

• Watts: 500, 420 & 300 at 120v, 500 & 300 at 220/240v
• Focus range - 6:1 with #1 reflector & FTK lamp.
• Quick-change super-spot accessory reflector for exceptionally long throws at all voltages.
• Protective fornt screen must always be used.

Lowel Tota Light (T1-10)

Compact, rugged & versatile, the broad throw Tota-light is a Lowel time honored favorite. It can be used with its umbrella or gel-frame & diffusion as a soft key, fill, or backlight. With its adjustable reflectors, it can be a smooth & even background light, or point it toward the ceiling to raise the ambient (base) light level of a room. Tota is also widely used for photographic copy work.

Adjustable reflecting doors can illuminate four walls evenly from a corner or compensate for light fall-off on vertical surfaces lit from above or below.

• Watts: 750 & 500 at 120v, 800 at 220/240v.
• 360º constant tension no-yoke tilting. Large, cool knobs.
• Closes compactly for storage & travel.
• Never operate with doors closed beyond notched safety stop.
• Protective front screen must always be used.

Lowel DP-Light (D2-10)

The DP is a long time Lowel workhorse. It's a powerful key, backlight or background light. Add an umbrella or diffusion for soft key or fill light, swap to the super-spot reflector for long throws, or customize it with a variety of other accessories. The DP is built for a long multi-use life.

Peened, parabolic reflector provides non-crossover beam with axial filament orientation for improved shadow pattern and gel life.

• Watts: 1000, 750, 500 at 120v, 1000, 650 & 500 at 220 & 240v.
• Focus range - 8:1 with #1 reflector & FEL lamp.
• Quick-change super-spot reflector for exceptionally long throws at all voltages.
• Tilting: 170° no-yoke, constant-tension, one-handed tilting from straight up to almost straight down.
• Large cool knobs.
• Protective front screen must always be used.

Lowel Pro Light (P2-10)

With its high intensity #2 Reflector & Prismatic Glass, the tiny focusable Pro-light is more efficient than a mini-fresnel of equal wattage. It gives an exquisite even light, with fresnel-like shadow quality, evenly dispersed flood, and a uniform spot with significant barndoor cut.

Used with today's more light sensitive digital cameras & filmstocks, it's compact size makes it the perfect low-level key or accent light, fill light (with diffusion), or back-light for interviews & other small shooting-areas. In addition to a wide variety of customizing & control accessories, its versatility can be increased by adding a DC adapter cable & swapping its bulb for battery operation. Replace the Prismatic Glass with Clear Safety Glass for a non-focusing super-spot in special use situations.

The Pro-light is also now available in a dedicated CE approved 230v Euro model. Pro-light's AC cable has been updated with an IEC connector.

• Multi-use, tungsten halogen source.
• Focus range-5:1 with gca lamp.
• Watts: 250 & 125 at 120v, 200 at 30v, 100 & 50 at 12v. 230 & 300 at 230v.
• Tilting: 160°, adjustable, constant-tension, one-handed, no-yoke tilting.

Tristar Photoflood Kit #3

PICTURE NOT EXACTLY AS SHOWN

Cat. # TPF3 Photo Flood 3-Light Kit

Kit includes:

• 3 x 5070015 Cameron 10" Reflector and Lamphead
  
• 3 x 1901010 Cameron 7' Light Stand